Challenger DX77-FM Flush Mount Kit 70 Inch Rise
Regular price$1,370.28
- Warehouse clearance – offer valid until July 10
- In stock, ready to ship
Challenger DX77-FM Flush Mount Kit 70 Inch Rise
The Challenger DX77-FM is the factory-engineered recessed installation kit for the DX77 7,700 lb dual scissor lift (sold separately). It includes two precision-manufactured pit frames with integrated concrete tie points that are positioned before the concrete pour, securing the frames in place as the concrete cures without additional anchoring hardware.
Once installed, the platforms sit level with the shop floor when lowered, eliminating drive-over ramps and surface obstructions. The flush mount configuration delivers a 70" rise height for undercar clearance on passenger vehicles, light trucks, and SUVs.
The kit supports standard platform spacing of 21" to 27", with optional configurations for 36.8" spacing to accommodate wide electric vehicles and specialty applications. Designed and manufactured by Challenger Lifts in Louisville, Kentucky.
⚠
California Proposition 65 Warning
WARNING: this product can expose you to chemicals including styrene and vinyl chloride, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.p65warnings.ca.gov .
Features
- Two precision-engineered pit frames
- Integrated concrete tie points (no added anchoring)
- 70" rise height
- Standard 21" to 27" platform spacing; optional 36.8" wide spacing
- For Challenger DX77 dual scissor lift (sold separately)
Specifications
| Lift Compatibility (DX77 Sold Separately) | |
|---|---|
| Compatible Lift Model | Challenger DX77 Dual Scissor Lift |
| Lift Capacity | 7,700 lb (3,500 kg) Total |
| Capacity Per Pad | 3,850 lb (1,750 kg) |
| Flush Mount Rise Height | 70" |
| Platform Dimensions | |
| Platform Width | 24-1/2" |
| Platform Length | 59" |
| Overall Length (with Ramps) | 83-1/4" |
| Distance Between Platforms (Standard) | 21" - 27" (Adjustable) |
| Distance Between Platforms (Wide EV) | 36.8" |
| Outside to Outside (Standard) | 69-1/2" |
| Outside to Outside (Wide EV) | 83.8" |
| Installation Requirements | |
| Concrete Minimum Depth | 4" |
| Concrete Minimum Strength | 3,500 PSI |
| Concrete Reinforcement | Steel Reinforcement Required |
| Concrete Cure Time | 28 Days Minimum |
| Floor Level Tolerance | 3/8" Over Installation Area |
| Max Pipe Chase Length | 72" (Pit to Console) |
| Electrical Requirements (DX77 Lift) | |
| Motor | 2 HP |
| Power Supply | 208/220 VAC, Single Phase, 60 Hz |
| Circuit Breaker | 30 Amp Double-Pole (Dedicated Circuit) |
| Air Supply | 90-120 PSI (Clean and Dry) |
What’s Included
- Two (2) Flush Mount Pit Frames (Part# DX77-01)
- Integrated Concrete Ties for Securing Frames During Pour
- Installation Documentation and Pit Specifications